| Ονομασία μάρκας: | Optowix |
| Αριθμός μοντέλου: | MK1Q-13TC |
| MOQ: | 1 |
| Όροι πληρωμής: | T/t |
| Ικανότητα εφοδιασμού: | 10Kpcs |
| Attribute | Value |
|---|---|
| Optowix PN | MK1Q-13TC |
| Product Name | 100Gbps QSFP28 Transceiver, Single Mode, 20km Reach, Module |
| SpeedRate | 100G |
| Distance | 20km |
| Interface | duplex LC |
| Wavelength | 1310nm |
| Environment | 0ºC ~ 70ºC |
100Gbps QSFP28 Transceiver, Single Mode, 20km Reach
| Part Number | Product Description |
|---|---|
| MK1Q-13TC | 100G QSFP28 1310nm 20km, 0°C~+70°C |
The 100G LR1-20km QSFP28 optical transceiver, 100G QSFP28 LR1-20 is designed for using in 100-Gigabit Ethernet links up to 20km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA, 100G Lambda 100G LR1-20 and CAUI-4(no FEC). Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.
The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 20km links.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | Vcc | -0.3 | 3.6 | V |
| Input Voltage | Vin | -0.3 | Vcc+0.3 | V |
| Storage Temperature | Ts | -20 | 85 | ºC |
| Case Operating Temperature | Tc | 0 | 70 | ºC |
| Humidity (non-condensing) | Rh | 5 | 85 | % |
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V |
| Operating Case temperature | Tc | 0 | 70 | ºC | |
| Data Rate Per Lane | fd | 106.25 | Gb/s | ||
| Humidity | Rh | 5 | 85 | % | |
| Power Dissipation | Pm | 4 | W | ||
| Link Distance with G.652 | D | 20 | km |
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Differential Input Impedance | Zin | 90 | 100 | 110 | ohm |
| Differential Output Impedance | Zout | 90 | 100 | 110 | ohm |
| Differential Input Voltage Amplitude1 | ΔVin | 1600 | mVp-p | ||
| Differential Output Voltage Amplitude2 | ΔVout | 900 | mVp-p |
1 Differential input voltage amplitude is measured between TxnP and TxnN.
2 Differential output voltage amplitude is measured between RxnP and RxnN.
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Centre Wavelength | λc | 1304.5 | 1317.5 | nm | ||
| Side-mode suppression ratio | SMSR | 30 | dB | |||
| Average launch power | Pout | -0.2 | 6.6 | dBm | ||
| Optical Modulation Amplitude(OMA outer) | OMA | 2.8 | 6.8 | dBm | ||
| Transmitter and dispersion eye closure(TDECQ) | TDECQ | 3.6 | dB | |||
| Extinction Ratio | ER | 3.5 | dB | |||
| Average launch power of OFF transmitter | -30 | dB | ||||
| Receiver | ||||||
| Centre Wavelength | λc | 1304.5 | 1317.5 | nm | ||
| Receiver Sensitivity in OMA outer | RXsen | -7.6 | dBm | 1 | ||
| Average receive power | Pin | -10 | 6.6 | dBm | ||
| Receiver Reflectance | -26 | dB | ||||
| LOS Assert | -13 | dBm | ||||
| LOS De-Assert - OMA | -11 | dBm | ||||
| LOS Hysteresis | 0.5 | dB | ||||
1 Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FECs